Blog, Industry News
THOMPSON, CONNECTICUT USA, July 5, 2017
Numa, the world’s leading drilling technology provider, is proud to announce the addition of Drilling Supplies Europe (DSE) as its new distributor in Ireland. DSE is a leading supplier and manufacturer of consumables and equipment to the ground engineering market and brings a wealth of drilling experience to support the Numa DTH hammer and bit product line.
Established in 2001, DSE was formed to cater to the new and expanding HDD sector in Ireland. The company supplied the day to day consumables such as drilling heads, dies and drilling fluids. In March of 2017, industry veteran Niall Meehan took over as owner and managing director of DSE. Niall has over 20 years of industry experience and has completed numerous projects in the fields of water well, geotechnical, environmental, geothermal, trenchless, CBM and Shale & Gas Storage. DSE brings a great depth of experience to customers along with extensive product knowledge, practical solutions and a friendly service. The company also represents many other leading brands from drilling fluids to drilling rigs, compressors and mud pumps. The combination of a wide range of products, now including Numa DTH hammers and bits, allows DSE to tailor drilling packages to the specific needs of customers in the region.
Ralph Leonard, President of Numa, commented, “We are delighted to have partnered with DSE for the distribution of Numa’s DTH products. DSE is an extremely knowledgeable company focused on service and support which is an essential component to our continued expansion in the European market.”
Niall Meehan owner of DSE added, “Numa is a highly versatile and innovative manufacturer with a big future. We’re proud to be aligned with such a top flight organization as we continue to provide the right solutions for our customers”.
ABOUT NUMA
Numa provides the world’s leading drilling technology with over 110 DTH Hammer and Bit products serving 11 different industries. Our products are designed to drill vertical, horizontal, and reverse circulation holes from 3½ to 48 inches (89 – 1219 mm) in diameter in hard rock, overburden, or loose strata formations. Having customers in 105+ countries, we have built our customer-centric reputation on providing the highest value in products, performance, and personal service available in the rock drilling industry.
ABOUT DRILLING SUPPLIES EUROPE
Established in 2001 and with over 20 years of industry experience, Drilling Supplies Europe is a leading supplier and manufacturer of equipment and materials for both the trenchless and vertical drilling sectors.
The company has the knowledge and experience to provide and support industry with quality, reliable product at affordable prices.
Blog, Industry News, trenchless people
OLATHE, Kansas, July 10, 2017 — Vermeer Great Plains, a full-service construction equipment dealer with locations in Kansas, Oklahoma, and Western Missouri, is now 100 percent employee-owned through an employee stock ownership plan (ESOP).
As part of the new ESOP structure, Scott Ryals, former General Manager of Vermeer Great Plains, has taken on responsibilities as Chief Executive Officer. He leads the dealership with a vision focused on maximizing and improving the customer experience, though this goal is nothing new for the dealer’s employees.
“Since Vermeer Great Plains was founded, we have placed a high emphasis on serving our customers, Ryals said.” “The new ESOP plan will only reinforce this culture as the dealership’s success will directly benefit our employees who work every day to take care of our customers. We’re all working toward the same goal.”
Research shows that an employee ownership structure creates a positive work environment as employees all work towards a common goal. In the upcoming months, the employees of Vermeer Great Plains will be further educated about the new ESOP structure.
“The transition to the ESOP means the employees will receive an added future benefit based on how well we all grow the company,” Ryals said.
Customers have always been the most important aspect of the Vermeer Great Plains vision. They can expect even better service as the company learns and grows through this transition. According
to the ESOP Association, 84 percent of companies who participate agree the ESOP improved motivation and productivity. The combination of determined employees, excellent leadership and a
fresh employee-owned plan is sure to be a recipe for success and outstanding customer satisfaction at Vermeer Great Plains.
About Vermeer Great Plains
Vermeer Great Plains is a full-service dealer of Vermeer industrial equipment across Kansas, Oklahoma, and Western Missouri. Established in 1964, the dealership has grown to five locations in the region with 80 team members dedicated to sales, parts and service. Now 100 percent employee-owned, the Vermeer Great Plains team supports customers in the treecare, landscape, wood waste, organic recycling and underground utility construction industries. Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries.
© 2017 Vermeer Corporation. All Rights Reserved.
Blog, Industry News, trenchless products
THOMPSON, CONNECTICUT USA, Jun 27, 2017:
Numa, the world’s leading drilling technology provider, has announced an expansion of manufacturing capabilities at its US plant to keep up with growing demand for its DTH hammers and bits.
Over the past several years, Numa has heavily invested in its manufacturing capabilities to tackle the demands of building the world’s leading DTH equipment. The latest addition is a Doosan Puma 3100 which is a composite turning center that combines the functions of both a lathe and a machining center. By integrating the capabilities of multiple machines into one system, the turning center minimizes machining time and the number of machining operations. Complicated parts that previously required multiple machines and setups can now be completed by just one unit and one setup. The new equipment will improve productivity, precision, and ease of operation for the company and further improve its ability to manufacture quality products in a timely manner for its customers.
“The expansion of Numa’s manufacturing capabilities supports our vision for growth and puts us in the best position to build the world’s leading down hole hammers and bits,” said Ralph Leonard, President of Numa, “The new multi-tasking turning center offers higher productivity, greater accuracy, and enhanced user convenience which is instrumental to support the growth of our customers.”
ABOUT NUMA
Numa provides the world’s leading drilling technology with over 110 DTH Hammer and Bit products serving 11 different industries. Our products are designed to drill vertical, horizontal, and reverse circulation holes from 3½ to 48 inches (89 – 1219 mm) in diameter in hard rock, overburden, or loose strata formations. Having customers in 105+ countries, we have built our customer-centric reputation on providing the highest value in products, performance, and personal service available in the rock drilling industry.
Blog, Industry News, trenchless projects
Large Diameter XRE Machine to bore Akron, Ohio’s Wastewater Tunnel
A Robbins Crossover (XRE) TBM measuring 9.26 m (30.4 ft) in diameter underwent factory acceptance on May 30, 2016. The gargantuan machine was initially unveiled at Robbins’ Solon, Ohio headquarters during a press day on May 25 before being shipped 40 km (25 mi) south for construction of the Ohio Canal Interceptor Tunnel (OCIT) in Akron. Those present included Akron Mayor Daniel Horrigan, Robbins chief engineer Dennis Ofiara, and David Chastka, project engineer for contractor Kenny-Obayashi JV.
The TBM, which includes features of both EPB and Hard Rock Single Shield TBM types, is the first Crossover machine to be used in the United States. It will be launched from a 12 m (40 ft) deep portal site and build the first 68 m (226 ft) in soft ground, transitioning to a 183 m (600 ft) long zone of partial face shale before switching to hard-rock mode for the remainder of the drive in full face shale. Probe drilling will be done continuously using two probe drills to determine which mode the TBM should be in.
Unique aspects of the machine include a versatile cutterhead that will be configured with consideration for both the short soft ground section and the longer section (about 65% of the tunnel) in hard rock. A combination of disc cutters and sacrificial rippers will be used in case a cutter becomes blocked. The required rolling torque of the disc cutters has been reduced by 25% to encourage smooth rotation in soft ground. The motors of the XRE machine have been reworked from an original EPB configuration to permit higher motor speed at reduced torque for the open mode segments of the drive.
Muck removal will be achieved with a durable screw conveyor, the first flight of which is covered welded-in wear plates. The auger shaft is lined with hard facing in a crosshatch pattern, while the screw conveyor casing has been similarly lined in wear plates and hard facing. A wear monitoring plan has been prepared for the entire drive in order to maximize efficiency in the section of more abrasive rock. Robbins Project Manager Pablo Salazar is proud of the utilization of local jobs during the TBM construction and design process: “We have built good portion of the machine in the northeast Ohio area. Many components were fabricated locally with sub-suppliers, as well as in our own shop.” The muck will be transported out of the tunnel using a Robbins continuous conveyor system—the setup will be the 100th such conveyor supplied by Robbins for operation behind a TBM.
The machine was dubbed “Rosie” in honor of Rosie the Riveter, an icon representing the American women who worked in factories and shipyards during World War II. Hundreds of “Rosies” including Akron resident Rose May Jacob worked in factories to turn out materials and armaments for the Allied war effort. The TBM will be shipped in truckloads to the jobsite, with the large cutterhead shipped in four pieces. “The entire process of assembly has allowed the contractor to follow very closely through the testing of the machine, so they are very familiar with the TBM at this point. At the jobsite, we will also provide immediate support for both spare parts and personnel,” said Salazar. Jobsite supervisors from Robbins will assist in TBM assembly and excavation for at least the first 1,000 m (3,280 ft) of boring. Tunnel boring is scheduled to begin in August of this year.
The OCIT Project for the City of Akron consists of the construction of a conveyance and storage tunnel system to control Combined Sewer Overflows (CSOs) for several regulators in the downtown Akron area. The EPA-mandated project includes the 1.89 km (1.17 mi) conveyance and storage tunnel, as well as drop shafts, diversion structures, consolidation sewers, and related structures. The consent decree specifies that the tunnel must be operational by December 31, 2018.
Image 1: The 9.26 m (30.4 ft) diameter Robbins Crossover Tunnel Boring Machine (TBM) was designed and built in Robbins’ Solon, Ohio, USA facility.
Image 2: Robbins personnel proudly stand in front of the 9.26 m (30.4 ft) machine dubbed “Rosie”—the first Crossover TBM in the U.S.
Image 3: The Robbins TBM will bore in sections of both hard rock and soft ground to complete the Akron Ohio Canal Interceptor Tunnel (OCIT).
Blog, Industry News, trenchless products
GSSI, the world’s leading manufacturer of ground penetrating radar (GPR) equipment, announces the launch of the StructureScan™ Pro, a premier concrete scanning system that can accurately inspect concrete, measure slab thickness, and locate voids. StructureScan Pro is the ideal system for locating rebar, post-tension cables, and conduits; conduct real tie surveys for core clearance or post process data for reports. It reaches depths ranging from 0-18 inches. The system includes the newly updated SIR® 4000 control unit and a choice of the popular 1600 MHz or high-resolution 2600 MHz antenna. With a basic antenna upgrade, the SIR-4000 controller can also be used for utility detection and deep void detection applications.
StructureScan Pro locates embedments in real-time, showing such information as focus mode, zoom data, depth calibration and target markers. It also allows users to create x-ray-like 3D images of a survey area. The intuitive data visualization features includes the ability to slice through each data layer. Additional features include multiple color themes and save image functionality.
The updated SIR 4000 controller used with the StructureScan Pro is designed to bridge the legacy of GSSI’s traditional analog antennas with next-generation of digital offerings. The updates bring the StructureScan 2D collection module to the controller, simplifying its use for the concrete construction industry. The module includes high frequency antenna-specific set-ups to ensure survey efficiency, and enables the controller to automatically recognize smart antenna set-ups.
The updated SIR 4000 also enables the option of on-the-fly automatic gain to better enhance the data display, while still saving the file in the original raw format for post processing. Fully integrated, the SIR 4000 provides a 10.4 inch high definition LED display, a simple user interface, and plug-and-play GPS integration. The SIR 4000 is designed with a number of exclusive features, including a cast aluminum chassis that offers superior temperature stability, and an impact-resistant design that is fully IP 65 rated and can withstand tough jobsite conditions.
Offering the maximum in mobility, the StructureScan Pro system includes a lightweight, rugged handcart that is simple to transport. Also included is a 7-meter control cable, a rugged carrying case, two batteries and charger.
About GSSI
Geophysical Survey Systems, Inc. is the world leader in the development, manufacture, and sale of ground penetrating radar (GPR) equipment, primarily for the concrete inspection, utility mapping and locating, road and bridge deck evaluation, geophysics, and archaeology markets. Our equipment is used all over the world to explore the subsurface of the earth and to inspect infrastructure systems non-destructively. GSSI created the first commercial GPR system nearly 45 years ago and continues to provide the widest range and highest quality GPR equipment available today.
Blog, Industry News, trenchless products
Ottawa, IL, June 20, 2017 – LMK Technologies is proud to announce its continued five year partnership with Flow-Liner as a National Distributor of the Neofit System. The updated Neofit system is a durable, green, and cost effective method of trenchless rehabilitation of potable water lines, providing almost instantaneous results with increased flow rate and minimal diameter loss while creating a barrier from lead, preventing contamination and making water safe for consumers.
“LMK is very excited to continue partnership with Flow-Liner,” says Larry Kiest, Jr., President, CTO and Founder of LMK Technologies. “We look forward to promoting this technology with our highly skilled network of licensed contractors and distributors so water utilities across the country can benefit from improved water quality and meet the demand for renewed water service lines, complimenting the rise in rehabilitation of water mains.”
Neofit+ Plus System is a non-invasive pipe lining system especially designed for small diameter potable water service piping. The Neofit+ Plus Liner seals small leaks and pinholes in 1/2″ thru 2″ ID service piping. It also acts as a barrier between existing lead piping and potable drinking water. The Neofit+ Plus Liner is NSF-61 approved and has been tested to a minimum 50+ year life expectancy. LMK is promoting the advanced Neofit processing equipment, now providing lining lengths up to 300 feet. The technique necessitates minimal disturbance of surrounding ground, removing the risk of damaging other utility services. The absence of chemicals required makes it environmentally friendly and allows consumers to receive immediate return to service post processing.
To learn more about the Neofit+ Plus System, please contact LMK at 815-640-9302.
LMK Technologies, a world leader specializing in trenchless methods to renew subterranean pipeline infrastructure, has more than one hundred U.S. and foreign issued patents for its advancements in trenchless technology. Headquartered in Ottawa, IL since 1993, LMK serves the municipal, commercial and residential markets through a network of licensed and certified contractors. For more information regarding LMK, please visit www.lmktechnologies.com, call 1-815-640-9302 or email info@lmktechnologies.com.
THOMPSON, CONNECTICUT USA, July 5, 2017
